Features and function:
IFlux spray system
A function of flux spray device
1 nozzle: Import nozzle, better spray
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: Air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: Collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: Anti-corrosive controlling flux and display flux.
B function of flux foam device
with foam function, inner foam pump, it don't need outer air supply, it is convenient to spray flux.
1 preheating temperature range: Room temperature_260 degree
2 controlling way: with PID controlling to make welding process.
3 Heat: Infrared heating, temperature uniformity, rapid speed, PID supply heat.
4 Preheating security: Surface temperature is lower than fire point of flux.
5 Preheat: It can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
II Welding system features:
1 Material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Height range of wave crest: 0_8mm adjustment and keep wave crest balance.
4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
5 Unique nozzle: Double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
6 Heat controlling system: PID control, accuracy is +/-2
7 Moving tin pot: In and out can be finished by hand.
8 Motor of wave crest: Import motor, running stable.
9 Tin pipe: Screw thread stem
III Cooling system
1 Cooling motor: Unique cooling design, it can achieve import device effect.
IV Transmission system
1 chain: Stainless steel chain, anti-corrosive, ametabolic.
2 rail system: Special strong aluminum
3 speed: 0_1800mm/min
4 accuracy: Motor is from Taiwan, it is easy to adjust and maintain
V Controlling system
1 buttons on the panel: Manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: There are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: Relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: Over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: There are main wiring modularization and controlling modular
It is 2100mm when the machine include loading and cooling system.
|
Specification |
TB780D(double wave crest) |
| 1 |
Solder type |
Lead /lead free/ common solder |
| 2 |
Max PCB |
50_ 200mm |
| 3 |
Components height |
Above ≤ 130mm under ≤ 8mm |
| 4 |
Capacity |
100KG |
| 5 |
Preheating length |
600mm |
| 6 |
Temperature accuracy |
± 2 |
| 7 |
Spray way |
Foam |
| 8 |
Temperature range |
Room - 300º C |
| 9 |
Wave height |
0---8mm, keep balance wave crest |
| 10 |
Heating controlling |
PID |
| 11 |
Speed |
0_ 1800mm/min |
| 12 |
Start power/normal power |
12KW/6KW |
| 13 |
Preheating temperature |
Room_ 260º C |
| 15 |
Width adjust |
Manual adjusting |
| 16 |
Transmit angle |
3---8 |
| 17 |
Direction |
Right--left |
| 18 |
Controlling accuracy |
Taiwan motor |
| 19 |
Weight |
650KG |
| 20 |
Dimension L x W x H(mm) |
1400*1000*1500MM
It is 2100mm when the machine include loading and cooling system |
){kind=link}