Main technology parameters
Max power: 3KW
Pot capacity: 37Kg tin
Max PCB size: 200X270mm (max)
Temperature range: 200-300 degree LED display
Preheating temperature: 70-90 degree
Height range of wave crest: 5-12mm
Melting time: 80min
Flux spray: froth
Power supply: 220V± 1%V AC single phase 50Hz
(please connect power to the ground)
Transmission speed: 0.5-3m/min
Dimension: 850X600X330mm
Net weight: 48Kg
Working Principle
Working principle of wave soldering machine TB680 is below: It is out and home, put the PCB on the pallet, the pallet and PCB pass flux spout, the flux is spray on the PCB, with pallet moving, PCB are in preheating, when the preheating time is ok, the pallet will go back and then solder, after soldering it will go back original location, the welding process is finished.
Function
There are 6 parts: Flux, preheating, soldering, electrical controlling, exhaust unit and convection unit.
1. Flux
Flux parts are made of air pump, air tube, pin valve, filter, froth tube and flux box.
Flux
There is flux belt on the froth tube, PCB whose side has chips is on the top and touch flux, the side will has flux film.
2. preheating
It is made by melt board with resistor to provide heat for PCB.
3. soldering
It is made by tin pot, heating board, wave pump and tin.
Soldering
Figure 3: The solder will be divided into upper and lower levels by clapboard, the lower for the high-pressure layer, the upper layer for the low-pressure layer, liquid solder will be into high pressure layer driven by wave pump, the solder in the high pressure layer rotate and then pass regulator, it will overflow from the nozzle, the wave crest form and then fall into low pressure layer because of gravity
4 electrical controlling
With modular structure, transmission speed, solder temperature, preheating time and others can be adjusted and controlled. Working principle is shown in Figure 4. Figure 4 electrical controlling
4. exhaust unit
It is made of cover, air fan, air cover and air tube. All exhaust generated in soldering will be eliminated.
5. convection unit
It is made of chain, rail, drive and pallet. PCB will be sent in flux unit, preheating unit and soldering unit by convection unit.
Specification:
| Model |
TB680 |
Max PCB Soldering Size |
200mm * 270mm |
| FOB Price |
3770 USD |
Temperature Range |
200~300 |
| Payment |
By T/T 100% in advance |
Preheating Temperature |
90~130ºC |
| Packing |
Plywood case and film |
Wave height adjust range |
3~ 8mm |
| Gross Weight |
80 Kg |
Melt time |
60 Mins |
| Dimension |
1000 * 630 * 570 mm |
Spray Way |
Foamed |
| Video |
https://yadi.sk/i/G5029Bi7aRJNs |
Conveyor speed |
0.5~ 2m /min |
| The first Solder Paste Charge |
40Kg |
|
){kind=link}