| Functional module |
Operation mode |
Keyboard + mouse to complete all operations. |
| X-ray tube contro |
Click the mouse button to turn on or off X-ray, and the real-time tube voltage and current value are displayed. The user can click the up and down buttons, or drag the sliding bar, or manually input and adjust. |
| Statusbar |
The interlocking state, preheating state and X-ray switch state are indicated by the red and green flashes alternately. |
| Image effect adjustment |
The brightness, contrast and gain of the image can be adjusted freely to achieve satisfactory results. |
| Product list |
Users can store the current or call the parameters such as the position, brightness, contrast and gain of the z-axis previously stored. The next time the same product can be directly called, improving the detection efficiency. |
| Navigation window |
After the camera takes photos of the platform, click any position of the photo, and the platform will move until the picture shows the position. |
| motion Axis status |
Displays the real-time coordinates. |
| detection result |
Displays the results of each measurement in order ( measurements like bubble ratio, distance, area, etc. That customer set). |
| Speed control |
The speed of each axis can be adjusted to slow speed, constant speed and fast speed. |
| Bubble rate measurement |
Automatic calculation |
Click two points to determine a rectangle. The software automatically finds and measures the edge, pad and inner bubble of tin ball in the rectangle. The bubble rate, tin sphere area, circumference, maximum bubble ratio, length and width can be obtained, and ng or OK are represented by red and green colors. |
| Adjusting parameters |
The user can adjust the gray threshold, pixel, contrast, size filter and other parameters to get the accurate results of automatic calculation. |
| Manually add bubbles |
You can draw polygons or free graphics to calculate the bubble rate as bubbles. |
| Store parameters |
The user can store the gray threshold, pixel, contrast, size filter and other parameters of the current measurement bubble. The next time the same product can be directly called, and the detection efficiency can be improved. |
Other measurement functions
|
Distance |
Click a and B as the reference line as required, then click point C to measure the vertical distance from point C to the reference line. |
| Distance ratio |
It is used to measure the tin passing rate of circuit board through hole. A D point is set more than the measurement distance. The percentage of D in the vertical distance of C is obtained by dividing the vertical distance from point d to the reference line, divided by the vertical distance of point C. |
| angle |
Click a and B as the reference line as required, then click point C to measure the angle between Ba and BC rays. |
| circular |
It is used to measure round components such as tin ball. Click three points to determine a circle, and measure the circumference, area and radius. |
| square |
It is used to measure square components. Click two points to determine a square, and measure the length, width and area. |
| Automatic detection |
Set position manually |
Users can set any position on the platform as the detection point, and the software will automatically take pictures and save pictures. |
| array |
For detection points with regular arrangement, users only need to set two detection points and the number of rows and columns. The software will automatically take each detection point and save the picture. |
| Automatic recognition |
For detection points with obvious features, the software can automatically identify the specific location, measure and save the picture. |
){kind=link}
){kind=link}