2023 Manual precision stencil printer T4030:
Manual high precision screen printing T4030 is the equipment which is used for printing or leakage printing technology. The location is mainly by hand to pick-and-place PCB board and print. It has a low-cost and easy to use, easy to learn, high efficient, it is suitable for small and medium manufacture, multi-species research, development and production.
Technology parameter:
Max printing area: . 400× 300mm
Adjustment method: Contrapuntal calibration
Efined adjustment method: Adjust through accuracy screen pole, the accuracy: 0.1mm.
Suited range: Silk screen and steel screen
Weight: 20 kg
Dimension: 700*600*350 mm
Manual pick and place machine TP39V
[Profile]:
TP39V is designed specially for small and middle-sized manufactures and institutes. Various nozzles can be fixed on the machine and all kinds of chips can be picked and placed, for example diode, dynatron, SOT, SOP, PLCC, QFP, chip resistance, chip capacitor and others. Vacuum pump inside. High precision with good cameral.
[Operation process]:
24 types of chips can be hold by the disc feeder. 15 types of chips can be laid on the Belt feeder at most. First, lay all the chips on the feeder according to the actual production demand. Then turn on the power and move the pick and place head to the top of the chips. The chip will be picked by the nozzle automatically. After that, move the head to the right pad on the PCB. Then find the right pad with the help of the cameral and rotate the head and finish the alignment. Then simply press the mounting head down and step on the foot switch to end the mount of the chip.
[Innovations]:
1. High accuracy and stability of the pick and place head during high-speed movement is guarantied by exact guide tracks with vision position.
2. According with Human Engineering. Ease the worker.
3. Intelligent rotating feeder heightens the work efficiency. Intelligent feed after pressing the button.
[Specification]:
1. Mechanical four-dimensional degree of freedom:
X, Y axis have precision machine which can achieve the fine tuning in the directions of X and Y axis. Z axis can be freely adjusted. At the same time the angle θ Can be freely rotated.
2. Mounter TP39V has a 4D mechanical degree of freedom. Provided with high accuracy guide tracks for X, Y axis. Mounting Head can be exactly moved vertically and horizontally. Max. Distance for X axis: 550mm; Y axis 260mm. Z axis is provided with high accuracy guide tracks and sealed bearings. The mounting head can move up and down smoothly so that a high accuracy can be ensured during picking and placing. Distance for Z axis: 30mm.
3. Rotatable pick and place head. Angle θ Has a free rotation of 360° .
4. Max mounting size of PCB: 180× 300mm
5. Disk Feeder can rotate in both positive and negative direction.
6. Pick and place speed: 300-600 p/h
7. Weight: 35 kg
8. Dimension: 710mm x 610mm x 500mm
Lead free reflow oven with temperature testing T200C
T200C technology parameters
A: Temperature control segment: 40 segments
The segment can be set in computer according to the actual requirement.
B: Temperature-zone numbers: Single-zone and multi-segment
C: Temperature control system: PC control system, SSR non-contact output
D: Temperature accuracy: ± 2 ° C
E: Warm-up time: 3min
F: Temperature range: Room-temperature -360 ° C
G: Heating supply: Infrared ray + Hot air convection
H: Effective working table area: 360mm * 230mm (more than A4)
I: Welding time: 3min ± 1min
J Temperature curve: It can be set, adjusted and tested according to the actual requirement.
K: Cooling system: Transverse flow equal cooling
N: Rated voltage: AC single-phase, 220V; 50Hz
O: Rated power: 3.8KW Mean power: 1.6kw
P: Weight: 39 kg
| Model |
T200C |
| Temperature control segment |
40 segments |
| Temperature-zone numbers |
Single-zone and multi-segment |
| Temperature accuracy |
± 2 ° C |
| Warm-up time |
3min |
| Welding time |
3min ± 1min |
| Weight |
39 kg |
| Heating supply |
Infrared ray + Hot air convection |
){kind=link}