Product Description
SMT Leadfree Double Wave Soldering oven
TB980C
Product Description:
Double Wave Soldering oven TB980C has a synchronal feeding system. Synchronal chain with claws design, no noise, smooth conveying. Control system: Industry computer with signal processing by hearing is reliable and stable. Far IR preheating system to prevent the temperature going down. New type boost spraying system of the welding flux reduces the dosage of the flux. Conveying system: imported motor for driving with overload protection device. The width of the substrate is adjusted automatically by computer.
Specification:
Preheating Section (Infrared+ hot air): 4Kw * 2
Preheating temperature: Room-temperature ~180
Preheating control mode: PID Mode
Power of tin stove heating tube:2Kw * 8
Jointing control mode:PID Mode
Wave crest motor: imported high temperature resistant motor
Soldering tin capability:Max.500kg(Sn63Pb37);430Kg(Sn100%)
PCB width : Max.250mm
PCB Transmission speed: 0.5~1.8m/min
Transmission motor power:90W
Gross power:36Kw
Working power: 18Kw
Power supply : Three-phase,380V,50Hz
Air supply: above 5Mpa
Gas pressure of spray: 0.25Mpa~0.4Mpa
Spray gun driving type: need a spraying machine outside
Cooling system:wind cooling system.
Dimension (L*W*H) 4120 *1280 *1630
Weight: about 1050kg
Feauters:
1. The first Solder Paste charge 350Kg;
2. Can meet "SMD and DIP in different side"
3. "Industrial Computer" control system;
4. The Wave Height Max 15mm;
5. Can adjust PCB Max Width is 250mm;
6. "Spray flux, bottom preheater, double wave" and can configure "Hot air Knife"
){kind=link}