Manual Stencil Printer T1100
Automatic Stencil Printer T1100 provides dual squeegee and stencil auto lift for high efficient and automatic production with fine pitch printing of solder paste under fine X, Y, Z, and θ adjustments.
• Double-sized PCBs print, magnetism thimble support and fix PCB.
• Dual squeegee with its unique adjustable angle-of-attack for precise single or dual direction printing
• Stencil lift and squeegee’s up-and-down drive by speed control valve of cylinder.
• Squeegee drive by micro motor
• PLC control for high precision and low fault.
• Japanese linear guide assures squeegee moves smoothly
• Fine X, Y, Z, and θ adjustments for exact stencil-to-board alignment
Max print area 220 × 180mm, 220×240mm (optional)
Max steel seat size 350x400mm
Frames size: (400*350m)
Adjustable dual squeegee pressure/speed Control by valve of cylinder
Adjusting stencil size/thickness 350×400mm/ 20mm
Squeegee Drive by micro motor
Squeegee material stainless steel
Adjustable motor-drive squeegee for single or dual passes yes
Linear squeegee guide Yes
Automatic power frame lift yes
Magnetism thimble for double-sized PCBs yes
Adjustable angle of attack Yes
X & Y adjustment +/-10mm
Z axis adjustment 15mm
Θ adjustment Counter rotating dual knobs +/-5 ºC
Repeat accuracy <0.03mm
Adjustable accuracy <0.01mm
Ideal Max print accuracy 0.4mm IC, BGA with ball diameter> 0.3mm
Power supply AC220V, 50Hz
Max power 60W
Air pressure 0.4-0.7 Mpa