IGBT Online Vacuum Gas Welding Furnace

• Standard: GB, EN
• Surface Treatment: Spray Paint
• Energy Source: Laser
• Model NO.: V8S
• Transport Package: Plywood Vacuum Wooden Box
• Specification: 2600 * 1000 * 1300mm
• Trademark: TORCH
• Origin: China
• HS Code: 8501109101
• Production Capacity: 100sets/Year

Product Description

V8S  IGBT Online vacuum gas welding furnace


V8S is the smallest on-line vacuum welding furnace in the industry. It is featured by large output, low energy consumption, low nitrogen consumption, small room occupation, etc.

V8S is specially designed and optimized for the special requirements of vacuum welding package of leadframe products in semiconductor industry and vacuum welding package of power devices. Currently in consideration of many problems encountered by customers in the industry, our V8S-a vacuum furnace V8S is launched based from some optimizations.

V8S features:
I. large output:

For example, for 72mm wide lead frame, the production efficiency can reach 240-300 hours

With 120mm wide power module, the production efficiency can reach 130-200 pieces / hour.

II. Low energy consumption:

Starting power of the machine: 18kw

Average operating power of the machine: 8kw

III. Low nitrogen consumption:

The consumption of nitrogen is only 1 / 5 of that of other similar vacuum furnaces.

IV. Smaller space occupation:

Machine size: 2600 * 1000 * 1300mm

V8s Major technical parameters:

Series No	Critical parameters
1	Max. Length of heating zone	320*160mm
2	Heating method	infrared metal alloy heating
	Furnace hearth height	10mm
3	Oxygen content	100PPM
4	Highest temperature	450 degrees
6	Minimum vacuum value	50 PA (mechanical pump)
7	Vacuum pump pumping rate required	(50Hz)3L/S
8	Cooling mode	water cooling
9	Temperature control accuracy	0.1degree

V8s technical description

1. Meet the welding requirements of all kinds of solder (< 450 ºC):

For example: sac305 solder paste; sn63pb37 solder paste; sn90sb10 solder paste; in97ag3 solder paste; in52sn48 solder paste and other components solder paste.

2. Void ratio of V8s welding:

Void rate of welding plate: < 1%

Single void rate: 2%. Different welding materials and atmosphere will give influence on welding. At present, this data is based on the comprehensive data after customer test. Specific to different welding products, the data will be different.

3. V8s supports nitrogen atmosphere working environment and meets requirements of various welding processes.

4. V400 vacuum reflow welder is equipped with software control system, modular design and setting, it is simple and easy to understand of the operation interface.

5. The equipment does not need to be calibrated, and there will be no extra calibration cost

6. Equipment configuration:

No.	Description	configuration	QTY
1	vacuum reflow soldering furnace	V8L	1set
2	Temperature control system	standard configuration (20 groups of temperature control thermocouples)	1set
3	Temperature measurement system	standard (4 sets of temperature thermocouples)	2 set
4	Vacuum system	standard	1set
5	industrial computer	Siemens industrial computer	1set
6	heating platform	alloy heating platform	2set
7	Water cooling system(including industrial water chiller)	standard (water chiller, water cooling pipeline and interface	1set
8	Nitrogen atmosphere protection system	standard (nitrogen gas pipeline and interface)	1set
9	Flux recovery system	standard (flux cooling, filtering system and interface)	1set
10	vacuum reflow welding control system	standard (control software)	1set

Actual data of standard machine

20pa: 12min

50pa:12S

100pa:15S