Main electric part uses international brand components. Temperature control design achieves international advanced level with stable and even temperature. It is suitable for soldering CSP, BGA component.
Energy-saving inner oven design and heat insulation seal system, the power consumption is the lowest in this industry. (Common machine will cost 15KW/h. Our A8N just costs 8.5W/h). Which will save the power of 40%; If A8N works for 24 hours, that will save more than USD7500 per year.
Self-developed software system, stable and reliable, known as "SMT luxury industry software, " it will give accurate temperature testing for PCB board online and real-time monitoring. It can analyze testing data at any time and save, print out them.
Each zone takes compulsory independent cycle, independent PID control, upper and lower heat independently to make the temperature accuracy and even, large heat-capacity.
Warm up quickly, it takes only 20min from room temp to work temp.
Imported high speed motor that can bear high temp with stable wind, small vibration and sound.
High-quality good aluminum alloy guide rail, it is not easy to deform after high temperature.
Power-off protection, PCB board can be sent out after power-off without any damage.
Oven furnace uses stainless steel, anti-corrosion, no scaling-off to ensure PCB clean on soldering process.
Automatic monitoring displays work situation.
Professional wind turbine design ensures stable wind speed.
Forced air cooling, long cooling temperature zone to ensure the cooling effect is good. Circling water cooling, rapid and even, tin point smooth and bright (optional).
Circle water cooling speed is quickly and the tin ball is bright.
Nitrogen flowmeter can tell you the flux at any moment.
| Model |
A8N |
| Heating part parameter |
| Heating zone |
8 heating zone(8 upper, 8 cover)+4 cooling |
| Heating method |
Hot air convection heating |
| Transmission parameter |
| PCB Board width |
Max: 400mm |
| Chain-driven Mesh belt conveyor |
Net belt and chain-driven transmission |
| Mesh belt width |
Max: 500mm (adjustable) |
| Mesh structure |
# |
| Guide rail width |
70-500mm (adjustable) |
| Guide rail |
Double parallel guide rail (Optical) |
| Automatic chain lubrication |
High-temp Lubricating oil |
| Conveyor speed |
Max: 2000mm/min |
| Control part parameter |
| Power supply |
380V (3 ph, 4 wires) 50/60Hz |
| Power of start-up |
33kw |
| Power of consumption of operation |
8.5KW |
| Heater power |
2KW |
| Warm-up time |
About 20min |
| Control system |
PLC+ Torch module temp control system+ IPC |
| Range of temperature control |
Room Temperature-360 º C |
| Temperature control |
PLC+PID+SSR |
| Precision of temperature control |
± 1º C |
| Temperature distributing error |
± 2º C |
| Machine Body Parameter |
| Weight |
Approx: 2300kg |
| Dimension(L× W× H )(mm) |
5500*1500*1600 |
| Special Configuration |
| Nitrogen protection |
stander configuration(can choose O2analysis equipment) |
| Oxygen density |
300-500/PPM |
| Consumption of Nitrogen |
10-30m3/h |
){kind=link}