Beijing TORCH TB780D PCB Medium Plug In Soldering Oven Lead Free Wave Soldering Machine
Features and function:
I. Flux spray system
A function of flux spray device
1 nozzle: Import nozzle, better spray
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: Air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: Collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: Anti-corrosive controlling flux and display flux.
B function of flux foam device
With foam function, inner foam pump, it don't need outer air supply, it is
Convenient to spray flux
1 preheating temperature range: Room temperature_260C
2 controlling way: With PID controlling to make welding process.
3 Heat: Infrared heating, temperature uniformity, rapid speed, PID supply heat.
4 Preheating security: Surface temperature is lower than fire point of flux.
5 Preheat: It can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
II Welding system features:
1 Material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Height range of wave crest: 0_8mm adjustment and keep wave crest balance.
4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
5 Unique nozzle: Double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
6 Heat controlling system: PID control, accuracy is ± 2
7 Moving tin pot: In and out can be finished by hand.
8 Motor of wave crest: Import motor, running stable.
9 Tin pipe: Screw thread stem
Cooling system
Cooling motor: Unique cooling design, it can achieve import device effect.
IV Transmission system
1 chain: Stainless steel chain, anti-corrosive, ametabolic.
2 rail system: Special strong aluminum
3 speed: 0_1800mm/min
4 accuracy: Motor is from Taiwan, it is easy to adjust and maintain.
V Controlling system
1 buttons on the panel: Manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: With short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: There are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: Relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: Over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: There are main wiring modularization and controlling modularization.
| |
solder type |
lead / common solder |
2 |
max PCB |
50-200mm |
3 |
Components height |
Above ≤ 130mm under ≤ 8mm |
4 |
Capacity |
100KG |
5 |
Preheating length |
600mm |
6 |
temperature accuracy |
± 2 |
7 |
spray way |
Foam |
8 |
temperature range |
room - 300 |
9 |
wave height |
0-8mm, keep balance wave crest |
10 |
heating controlling |
PID |
11 |
speed |
0-1800mm/min |
12 |
start power/normal power |
12KW/6KW |
13 |
preheating temperature |
room-260C |
15 |
Width adjust |
Manual adjusting |
16 |
Transmit angle |
3-8 |
17 |
Direction |
right→ left |
18 |
controlling accuracy |
Taiwan motor |
19 |
Weight (Kg) |
650KG |
20 |
Dimension L x W x H(mm) |
1400*1000*1500MM
it is 2100mm when the machine include loading and cooling system. |
){kind=link}