Best selling desktop manual solder paste stencil printer T1000
T1000 principle and technology parameters
1 T1000 is manual high precision screen printing machine, without electric components and air components(air handspike)
2 Scraper moving is driven by precision guideway to make no space touch between scraper and moulding board.
3 Using magnetism thimble and omnipotent thimble to position and support PCB to make sure take off template.
4 Install template with double side fixing technology.
5 with two scrapers design. The pressure adjustment is by mechanism adjusted, mechanism insurance control ascend and descend of scraper.
6 Round axes guideway can be adjusted by fix frame. All kinds of moulding board can be installed on printers.
7 lifting template can be finished by handle, using it with air handspike.
8 X, Y, Z and angle can be adjusted, adjusting 4 axes to achieve corresponding between pad and bore, adjust distance between PCB and moulding board by platform.
9 Fix scraper and run it on the parallel guideway, there are front scraper and back scraper. They can ascend and descend, after step 1, front(back) scraper fall down printing location, and then run backward(frontward), after running, scrapers go back original station.
10 max print area: 300*400mm
11 max size of steel board: 400*500m. The width of moulding board can be adjusted, 4 points location plane.
12 Scraper: 200mm, 304mm(optional), the forward and backward scope is more than 410mm
13 Scraper angle: 60 degree
14 Scraper material: Stainless steel(other material can be ordered)
15 Adjusting accuracy: <0.01mm
16 repeat accuracy: <0.03mm.
17 expected printing accuracy: 0.4mm IC; Tin ball of BGA is more than 0.5mm
18 Expected printing speed: 500PCS/minute
Parameter of T1000:
| Max print size of PCB |
300*400mm |
| Max size of steel frame |
400*500m. The width of moulding board can be adjusted, 4 points location plane. |
| Scraper |
200mm,304mm(optional), the forward and backward scope is more than 410mm |
| Scraper angle |
60 |
| Scraper material |
stainless steel(other material can be ordered) |
| Adjusting accuracy |
<0.01mm |
| Repeat accuracy |
<0.03mm. |
| Expected printing accuracy |
0.4mm IC;tin ball of BGA is more than 0.5mm |
| Expected printing speed |
50-60pcs/hour |
){kind=link}