Suppliers with verified business licenses
Audited Supplier 
Introduction:
1. significantly reduce solder welding bubbles so reduce the voiding rate as low as 1-2%.
2. improve product performance and electrical welding binding site, and effectively improve the reliability of welding quality solder joints.
3. double-sided PCB can be used for welding, suitable for mass production, continuous production line. Tact average control 30-60S.
4. vacuum, vacuum retention time, deflation time, so vacuum rate can be set freely.
5. complete the welding of the pcb board of installation the Aluminum heat sinks.
6. the concept of environmental protection ultra-low power consumption, high insulation design. Housing temperature does not exceed 40 degrees.
7. high efficiency, large capacity of flux recovery unit
8. using the integrated oxygen sensor technology, to ensure the precision control of oxygen content, and real-time / continuous monitoring of the residual oxygen content in the furnace
9. This equipment can be used as ordinary Nitrogen oven or air oven at the same time.
Main features:
| Model | V8L | V10L |
| Heating zones | 8 | 10 |
| Empty space | 1 (optional) | 1 (optional) |
| Cooling zone | 2 | 2 |
| Heating temperature | 280-320degree(350degreeoptional)280-320°C ( 330°C can be selected.) | |
| Vacuum degree | 0.5-5Kpa | |
| Nitrogen consumption | 300-500L/min | |
| Oxygen analyser | A standard configuration | |
| The highest component height | 30mm | |
| PCB width | 100-250mm (250mm or more optional) | |
| PCB length | 100-350mm | |
| Rail height | 850-950mm | |
| Flux recovery | Water recycling system | |
| Hot Wind speed adjusting | Infinite frequency conversion adjustment | |
| Type of cooling | Water cooling, configurated with industrial cold water machine | |
| Power | 380V/220V | |
| Dimension | 5800L*1500W*1600H | 6230L*1500W*1600H |
| Weight | 2800kg | 3200kg |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}