1. Temperature control system: Automatic temperature control by PID intelligence microcomputer
2. Heating system: Ceramic and stainless steel heater
3. Transmission system: AC conversion for adjusting the speed freely and vortex reducer
4. Alarm system: Automatic pilot light alarm
Features for TN370:
A. High reliability, component make at high temperature, so the character is stable.
B. High agility, seven temperature-zones. It meets the requirement of SMT welding. It can be used as solidified stove at the same time.
C. Low price, long life
D. For the middle size, it can meets all requirements from customs.
Technical instruction:
A: Temperature control segment: 14
B: Temperature-zone Number: Upper 7/lower 7, cooling room, upper 1/lower 1
C: Temperature control system: Automatic temperature control with PID intelligence microcomputer. SSR non-contact output
D: Temperature control accuracy: ± 2 degree
E: Warm-up time: 25min
F: Temperature range: Room-temperature -360 degree
G: Heating supply: Full hot-air convection
H: Transmit Belt: Stainless steel netting belt.
I: Transmit Belt width: 300mm
J: Transmit Belt speed: 0-1600mm/Min free adjusting
K: Warning system: Automatic warning with pilot light or sound when temperature is over.
L: Protection system: When power off suddenly, you can start special operation to send PCB out and will not be damaged.
M: Cooling system: Transverse flow vortex centrifuge blower
N: Power Supply: Three phase four wires, three phase, four wire, 380V
O: Max power: 38KW Average power: 21KW
P: Weight: 750kg
Q: Dimension Size: Length* width * Height3100× 900× 1390mm
Audited Supplier 
){kind=link}
){kind=link}