Automatic Soldering Machine TB780D
Features and function:
Flux spray system
A function of flux spray device
1 nozzle: Import nozzle, better spray
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: Air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: Collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: Anti-corrosive controlling flux and display flux.
B function of flux foam device
With foam function, inner foam pump, it don't need outer air supply, it is convenient to spray flux.
1 preheating temperature range: Room temperature- 260º C
2 controlling way: With PID controlling to make welding process.
3 Heat: Infrared heating, temperature uniformity, rapid speed, PID supply heat.
4 Preheating security: Surface temperature is lower than fire point of flux.
5 Preheat: It can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
Welding system features:
1 Material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Height range of wave crest: 0- 8mm adjustment and keep wave crest balance.
4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
5 Unique nozzle: Double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
6 Heat controlling system: PID control, accuracy is ± 2
7 Moving tin pot: In and out can be finished by hand.
8 Motor of wave crest: Import motor, running stable.
9 Tin pipe: Screw thread stem
Cooling system
Cooling motor: Unique cooling design, it can achieve import device effect.
Transmission system
1 chain: Stainless steel chain, anti-corrosive, ametabolic.
2 rail system: Special strong aluminum
3 speed: 0- 1800mm/min
4 accuracy: Motor is from Taiwan, it is easy to adjust and maintain
Controlling system
1 buttons on the panel: Manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: With short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: There are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: Relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: Over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: There are main wiring modularization and controlling modularization.
|
Specification
|
TB780D(double wave crest)
|
1
|
solder type
|
lead / common solder
|
2
|
max width of PCB
|
200mm
|
3
|
Components height
|
Above ≤130mm under ≤8mm
|
4
|
Capacity
|
100KG
|
5
|
Preheating length
|
600mm
|
6
|
temperature accuracy
|
±2
|
7
|
spray way
|
Foam
|
8
|
temperature range
|
room - 300 degree
|
9
|
wave height
|
0_8mm, keep balance wave crest
|
10
|
heating controlling
|
PID
|
11
|
speed
|
0_1800mm/min
|
12
|
start power/normal power
|
12KW/6KW
|
13
|
preheating temperature
|
room_260degree
|
15
|
Width adjust
|
Manual adjusting
|
16
|
Transmit angle
|
3-8
|
17
|
Direction
|
right→left
|
18
|
controlling accuracy
|
Taiwan motor
|
19
|
Weight (Kg)
|
650KG
|
20
|
Dimension L x W x H(mm)
|
1400*1000*1500MM
it is 2100mm when the machine include loading and cooling system.
|
Audited Supplier 
){kind=link}
){kind=link}