- Model NO.: TR340C
- Control Mode: Software
- Weight: 450k
- Power Supply: 3 Phases, 4 Wires, 380v or 220v
- Specification: 4 Temperature Zones
- HS Code: 8514109000
- Temperature Zone: 4 (4 up. 4 Down)
- Heating: Forced Hot Air Convection
- Dimension: 2200× 900× 1390mm
- Trademark: TORCH
- Origin: Beijing, China
1. Heating system: We use high efficient and energy-saving nichrome heating tube, advanced technology and long time serve life. Unique hot air circulation system to ensure PCB and components heat evenly and high efficiency, warm- up fast.
2. Safety protection system: We use large-power high-voltage (450V)SSR non-contact output, safe and reliable. Combining with unique fuzzy control function and data collection function to monitor the temperature and thermel value change, control heating part by min pulses and response rapidly to avoid damaging the machine due to large current under temperature control accuracy. Meanwhile, each group of temperature zone equips high temperature and voltage protection fuse to ensure the complete of system can run stably and safety.
3. Industrial computer and PID intelligent high precision controller to control heating volume accurately and response to heating varying at outside to guarantee temperature more evenly. The machine is modularization design for easy to maintenance and repair.
4. Outer shell and furnace can be open entirely for easy to clean and maintenance
A. Welding control visibility: TR340C uses advanced furnace temperature collection system. It can test furnace temperature automatically. Temperature curve can be saved and printed out.
B. Reliable and stable transmission system: TR340C driving system uses high-quality motor, closed-loop speed adjustment combination with gearbox reducer of 1: 100, runs stable with the speed of 0-1600mm/min.
C. Stable and reliable electronic control system: Relay switch protection function, temperature cool down after power off to avoid component deform and heater damage due to uneven cooling.
D. Sudden power-off protection to endure PCB board output without damage, Windows operation platform is strong and high stability.
|Heating part parameter||TN340C|
|Heating part parameter|
|Temperature zone No||4 heating zones (up 4, down 4)|
|Cooling zone||1 (up 1, down 1)|
|Heating method||Full forced hot air circulation|
|Cooling system||two group of cross-flow type whirlpool Centrifugal Fan for cooling down evenly|
|Temperature control system||PC and Torch self-developed software control|
|Temp control accuracy||± 2 º C|
|Warm-up time||< 30 min|
|TempRange||Room temp--360º C|
|Heating way||Full hot air circulating convection|
|Built-in automatic relay heating system||Avoid oven controller or motor damage due to overflow when machine start-up suddenly and protect the component from damaging on welding process.|
|Conveyor||stainless net belt|
|PCB conveyor height||900± 20mm|
|Conveyor speed||net belt transmission speed: 0-1600mm/min adjustable|
|Control part parameter:|
|Alarm system||direction light or voice alarm when temperature is over-high.|
|Protection system||Start operation device to send PCB boards out of the oven when power is off suddenly to protect the component from damage.|
|Control system||PLC+ Torch module temp control system +IPC|
|Temperature control||Advanced Intelligent PID temperature control automatically in each zone + SSR non-contact output|
|Precision of temperature control||± 2 º C|
|Temperature distributing error||± 2 º C|
|Power supply||3 phases, 4 wires, 380V or 220V|
|normal power||8 KW|
|Machine Body Parameter|
|Dimension (L*W*H)||2200× 900× 1390mm|