Semi-automatic stencil printer T1200LED:
1. Introduce:
T1200LED is the most economy with high precision semi-auto stencil printer, especially for LED flexible strip production. PCB is fixed on the flexible work table, which is suit for single board and double board. PCB position adjust, work table removing, the rise and fall of scraper are controlled by frequency conversion motor. Can make sure the moving accuracy and high repeated accuracy. It's the best choice for LED production.
LED Automatic Chip Mounter
Model: LED660/LED660V
Introduce:
LED 660 is a professional LED pick and place machine, features high speed, high accuracy. It achieves LED circuit board high-volume assembly.
[Introduction]:
Heating system:
TN380C adopts high effective and energy-saving nickel-chromium heating tube. Advanced technology and Long life. And TORCH self-developed hot-air circling system features warm up quickly, which can make PCB component be heated evenly.
Protection system:
TN380C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
Temperature control system:
Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
Outer shell system:
Outer shell and furnace body of TN380C can be opened wholly and automatically. It is convenient to clean and maintain it.
Semi-auto stencil printer
MODEL:T1200LED
1) Max printing PCB size (X×Y) :1200×300mm (600*300mm optional)
2) Printing plat flam:( X×Y):1220×350mm
3) Max stencil size (X×Y):1300×550mm
4) Min stencil size (X×Y):330×370mm
5) Micro adjust range :X,Y±10mm,θ angle :±30C
6) Voltage: single phrase AC220V,50Hz
7) Demission MM:1850×890×1760
| Model |
LED660 |
LED660V |
| Mount head |
6 pcs |
| Max circuit board size |
1200*350mm |
| Max moving range |
X axis 1500mm, Y axis410mm |
| Max moving range of Z axis |
15mm |
| Typical Mounting speed |
13000-14000cph |
| Max mount speed |
18000cph |
| Mount accuracy |
+/-0.1mm |
| Position method |
Machinery position |
Mark image identify |
| Component available |
0603 and above SMD component and LED,SOT,SOP |
| Programme method |
Automatic data import/ video study/ keyboard input |
| Belt feeder |
8mm, 12mm, 16mm and 24mm |
| Feeder num |
6 pcs of GF series feeder can be set (12 pcs feeders are optional) |
| Operation system |
WINDOWS XP |
| Compressed air |
internal vacuum, (large production should use industrial air pump) |
| Power supply |
220V,50Hz, 4.5 Kw |
| Weight |
500Kg |
| Dimension |
2600×680×1500mm |
| Heating part parameter TN380C |
| Heating zone |
8 heating zones(8 upper, 8cover)+1 cooling zone |
| Heating method |
Full forced Hot air heating |
| Warm-up time |
25min |
| Cooling zone |
1 zone, (1up/1 below) |
| Cooling method |
transverse flow vortex centrifuge blower |
| Built-in automatic relay heating system |
To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding. |
| Transmission parameter |
| PCB Board width |
≤ 300mm |
| PCB conveyor Height |
900±20mm |
| conveyor direction |
L→R or R→L |
| Conveyor Material |
Stainless steel |
| Chain-driven Mesh belt conveyor |
Net belt and chain-driven transmission |
| Mesh belt width |
300mm |
| Conveyor speed |
0-1600mm/min adjustable |
| Control part parameter |
| Power supply |
380V (3 ph, 4 wires) 50/60Hz |
| Max Power |
42KW |
| Normal working power |
23KW |
| Warm-up time |
≤ 30min |
| Control system |
PLC+ Torch module temp control system+ IPC |
| Range of temperature control |
Room Temperature-360 C |
| Temperature control |
Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output |
| Precision of temperature control |
± 2 C |
| Temperature distributing error |
± 2 C |
| Machine Body Parameter |
| Net Weight |
860kg |
| Dimension(L×W×H)mm) |
3500×900×1390mm |
|
Audited Supplier 
){kind=link}
){kind=link}