Ynchronous PCB board input system which runs with chain claw to ensure reliable, durable and no noise, stable transmission.
Introduction:
TB880C has a synchronal feeding system. The synchronal chain has claws' design, do no make noise, and has a soft conveying.
Control system: The computer's Industry with signal processing by hearing is reliable and stable. Far IR and preheating systems are there to prevent the temperature from going down. The new type boost spraying system of the welding flux reduces the dosage of the flux.
Conveying system: It is an imported motor to drive with overload protection device. The width of the substrate is automatically adjusted by the computer
| Preheating Section (Infrared+ hot air) |
3Kw * 2 |
| Preheating temperature |
Room-temperature -300 |
| Preheating control mode |
PID Mode |
| Power of tin stove heating tube |
6Kw * (1.5KW*2+3) |
| Jointing control mode |
PID Mode |
| Wave crest motor |
imported high-temperature resistant motor |
| Soldering tin capability |
Max.500kg(Sn63Pb37);430Kg(Sn100%) |
| PCB width |
Max.250mm |
| PCB Transmission speed |
0.5~1.8m/min |
| Transmission motor power |
90W |
| Gross power |
14Kw |
| Working power |
18Kw |
| Power supply |
Three-phase,380V, 50Hz |
| Air supply |
above 5Mpa |
| Gas pressure of spray |
0.25Mpa~0.4Mpa |
| Spray gun driving type |
need a spraying machine outside |
| Cooling system |
wind cooling system. |
| Dimensions (L*W*H) |
3400 *1200 *1500 |
| Weight |
about 1250kg |
Audited Supplier 
){kind=link}
){kind=link}