- Model NO.: PCB2300
- Usage: Woodworking
- Drive Type: Stepper Drive
- Current: AC
- Min Distance: 8 Mil
- Dilling Deepth: Dilling Deepth
- Working Accuracy: 6mil
- Origin: Beijing, China
- Engraving Machine Type: PCB
- Power: Small Power
- Control: PCB
- Condition: New
- Min Width: 6 Mil
- Driling Diameter: 0.4--3.175mm
- Trademark: torch
1. Drill the PCB board with copper and foil, PCB is made through peeling off unnecessary copper and foil by carving knife to control the
Define of the hole.
2. Can set up the origin derectely and return
3. Carve by software and can preview the circuit, also can show the carving circuit
4. Can finish multi-circuit at one time
5. Can continue carving and stop, recover
6. Can finish composing carving with two foil knife
7. Can meet compliment carving and perfect carving
8. Control the rotational speed intelligently.
1. Can be suit to double PCB
2. High efficiency: It merely need a few minutes to make a piece of PCB.
3. Accuracy: The min error of numerical control drill hole less than 1mil (0.025mm).
4. Automatism and convenience: Simple software hardware installation, . Operate the manufacturing process by striking the function keys of operation system.
5. Can define the PCB
6. Can carve curve circuit
Please contact us to get more information about PCB semi-automatic plate making machine.
|Worktable board (mm)||200*200|
|Repeat Accuracy||The least error of Data control drill less than 1mil(0.015mm)|
|Function Request||Protel PCB document can be directly put in.|