Full Hot air 6 Heating zone Lead Free Reflow Oven/ Welding TN360C
Model:TN360C
The selling point of TN series:
1. Chanel reflow oven with the thickness of 150mm
2. Use 24 chanel modular design reflow oven hardware temperature control system.
3. The only industry can achieve custom fuinction reflow oven software system.
4. The only industry have remote control reflow oven software system
5. Equipped with top brand HP OR Lenovo computer, such as optional industy computer according to customer requirment.
[Introduction]
Heating system:
TN380C adopts high effective and energy-saving nickel-chromium heating tube. Advanced technology and Long life. And TORCH self-developed hot-air circling system features warm up quickly, which can make PCB component be heated evenly.
Protection system:
TN380C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
Temperature control system:
Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
Outer shell system:
Outer shell and furnace body of TN380C can be opened wholly and automatically. It is convenient to clean and maintain it.
| Heating part parameter |
| Heating zone |
6 heating zones(6 upper, 6cover)+1 cooling zone |
| Heating method |
Full forced Hot air heating |
| Warm-up time |
25min |
| Cooling zone |
1 zone, (1up/1 below) |
| Cooling method |
transverse flow vortex centrifuge blower |
| Built-in automatic relay heating system |
To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding. |
| Transmission parameter |
| PCB Board width |
≤ 300mm |
| PCB conveyor Height |
900± 20mm |
| conveyor direction |
L→ R or R→ L |
| Conveyor Material |
Stainless steel |
| Chain-driven Mesh belt conveyor |
Net belt and chain-driven transmission |
| Mesh belt width |
300mm |
| Conveyor speed |
0-1600mm/min adjustable |
|
| Control part parameter |
| Power supply |
380V (3 ph, 4 wires) 50/60Hz |
| Max Power |
34KW |
| Normal working power |
19KW |
| Warm-up time |
≤ 30min |
| Control system |
PLC+ Torch module temp control system+ IPC |
| Range of temperature control |
Room Temperature-360 C |
| Temperature control |
Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output |
| Precision of temperature control |
± 2 C |
| Temperature distributing error |
± 2 C |
| Machine Body Parameter |
| Net Weight |
680kg |
| Dimension(L× W× H )(mm) |
2900× 900× 1300mm |
){kind=link}
){kind=link}